With popcorn ceiling removal, ceiling light cover, and popcorn ceiling patching becoming more common, Shiplap is getting more attention. The shiplap ceiling is a new ceiling texture that provides an alternative way of covering holes in the ceiling.
It’s ideal for ceilings with popcorn ceiling and is cheaper than popcorn ceiling patching. Plus, it adds character to your room and makes it feel taller.
This blog will help you understand how to install shiplap ceiling over popcorn ceiling and its advantages over popcorn ceiling.
To cover up a popcorn ceiling, you can install shiplap. Nails may be used to attach shiplap planks to the ceiling in a variety of sizes. Cut the shiplap boards to size and affix them to the joists with 2-inch finish nails after measuring the popcorn ceiling and locating the joists above it.
The most common sliding material is shiplap, which is composed of roughly 19 millimeters thick milled pine or roughly 25 millimeters thick rough-sawn pine.
Because of its delicate grain, rustic appeal, and aesthetics, shiplap has lately become a popular interior design option – particularly for walls rather than drywall.
Can You Use Shiplap to Cover Popcorn Ceiling?
Yes, you can use shiplap to cover popcorn ceiling.
Covering your popcorn ceiling with Shiplap planks will upgrade your room if it has flaws and you don’t want to go through the expense or mess of removing it.
Shiplap planks may not just enhance the look of your home but may also increase the height of your interior area.
How to Install Shiplap Over Popcorn Ceiling
I’ll first list the equipment and materials you’ll need to cover the popcorn ceiling with shiplap boards before I go into detail about the processes involved.
First, you’ll need to buy shiplap planks. Measure the length and width of the room, then divide the surface area of a single Shiplap plank to determine how many Shiplap planks you’ll need.
A miter saw, measuring tape, finish nail gun, 2-inch finish nails, stud finder, ladder or step stool, Multi-tool, Hole cutter, Caulk, Spackling and Putty knife are all essential tools when it comes to painting the ceiling.
To install shiplap over a popcorn ceiling, follow these steps:
Step 1. Remove everything from the ceiling
Fixtures must be removed from the ceiling before anything else can be done.
Anything you’ve put up in your ceiling, including air vents, chandeliers, and lights, must be removed.
Step 2. Mark the ceiling joists
To find and mark the ceiling joists, use an accurate stud finder.
The ceiling joists, which support the ceiling materials and connect the outside walls, are made of timbers or plywood sheets right above the ceiling.
They’ll be used to mount shiplap boards on this project.
Step 3. Cut and attach the shiplap planks
The shiplap planks must be cut and attached once the joists have been marked. To size the shiplap planks, use a miter saw. Place the first ship plank on the ceiling and align it correctly with the wall.
When nailing the shiplap plank over the original joists of the popcorn ceiling, hold the finish nail gun at a 45-degree angle.
This will fix the enforcements above, preventing the ship planks from shifting against one other.
Drive the 2-inch nails into the tongue’s edge with a nail gun, spacing them every 2 inches.
Attach a shiplap plank to the popcorn ceiling next to the fixture’s hole and mark the space that will be required if you want to make room for fixtures like chandeliers or air vents. For straight cuts, use a multi-tool, while for circle cuts, use a hole cutter.
Step 4. Caulking and spackling
Now is the time to caulk and spackle once the shiplap planks are secured.
Caulking and spackling is a type of painting that uses caulk coating and spackle compound to fill gaps and holes.
Caulk is a kind of coating that resists moisture, while spackle is a non-water-resistant substance that dries hard.
First, using a caulking gun, apply caulk coating to the room’s edges in a tiny bead. To create a seal between the ceiling planks and the walls, use your fingers to smooth the coating.
Fix painter’s tape to the wall if you want to keep the coat from contacting your wall.
On the surface of the shiplap ceiling, the nail holes will be visible. Smooth them with your finger or another medium after spackling them with a putty knife.
5. Paint the shiplap ceiling
Your shiplap planks should be painted using ceiling paint.
Roll the ceiling paint in the same manner as you would shiplap plank to begin with.
After the painting is completed, replace your fixtures and air vents.
Cost of Putting Shiplap on Popcorn Ceiling
Many variables, such as the kind of shiplap utilized, the size of the space, and whether or not the job will be finished by a DIYer or a professional contractor, determine how much it will cost to cover a popcorn ceiling with shiplap.
As compared to other siding options like Dryvit, shiplap is more cost-effective. Shiplap wood panels cost $2.50 to $7 per square foot, depending on the type of installation. A single room will typically cost between $1,200 and $1,700 to cover.
The cost is roughly $3.50 per square foot to use Shiplap Peel and Stick Fabric instead of Shiplap panels. If you’re on a shoestring budget, this is an affordable option.
Advantages of Shiplap Ceiling Over Popcorn Ceiling
1. Easy to install
Shiplap ceiling is a type of ceiling panel that is made from sheets of wood that are fastened together with nails or screws.
This type of ceiling can be easily installed in a variety of different ways, depending on the requirements of the project.
For instance, shiplap ceiling can be attached to the wall using drywall anchors. Alternatively, it can be mounted directly onto studs or joists.
Shiplap ceiling is an affordable and low-maintenance option that can update your home’s appearance quickly and easily.
It is also a good choice for households looking for a cost-effective way to update their ceiling.
2. Good visual impression
Shiplap ceiling is a type of wood paneling that is popular for its good visual impression. It can be used to cover areas such as ceilings and walls and provides a contemporary look and feel that can improve the aesthetics of any room.
Shiplap ceiling panels are easy to install, requiring only basic tools and skills. Their versatility makes them a good option for covering a wide range of needs, from indoors to outdoors.
The good visual impression of Shiplap ceiling can be attributed to the unique texture and character of the material.
It is made from multiple layers of different types of wood that give it a textured appearance and distinctive look.
Overall, Shiplap ceiling panels provide a cost-effective and versatile solution for covering areas throughout your home or business.
3. Make a room feel taller
Shiplap ceiling is a popular ceiling design that can help make a room feel taller. It is usually made of wood or plywood and is installed by nailing strips of wood to the ceiling joists.
Shiplap ceiling is a versatile and affordable way to add character and warmth to any room. Whether you’re decorating your living room, bedroom, or bathroom, shiplap ceiling is an easy and effective way to create a cozy and unique atmosphere.
Besides, it can help save on costs and increase the lifespan of your ceiling. Thus, it is an excellent investment for any homeowner looking to upgrade their interior space.
4. Adds timeless character
Popcorn ceilings are a popular choice for Updated Home Interior Design because they add a touch of modernity and style to any room.
However, popcorn ceilings can be dated and unattractive after a few years. If you want an update to your ceiling that is both affordable and timeless, Shiplap ceiling panels are an excellent option.
These ceiling panels are made from wood strips that are fastened together with nails or screws, creating a unique texture that can be used to cover the ceiling in just a few hours.
By replacing popcorn ceiling with Shiplap ceiling panels, you can update your space without sacrificing its character and charm.
These ceiling panels offer a sophisticated look that is sure to enhance your living room, dining room, or bedroom.
5. Shiplap is less mess
Shiplap ceiling is a type of wood paneling that is typically used to cover ceilings. It is less messy than popcorn ceiling because it does not require the use of adhesive or screws.
This makes shiplap ceiling an easy and affordable option for transforming a room into a stylish and modern look.
Shiplap ceiling is also a durable and cost-effective choice that can be easily installed by a professional contractor.
Whether you are looking for a quick and easy DIY project or seeking an upgrade to this popular style, shiplap ceiling is sure to deliver maximum impact for your living space.
6. Shiplap works with all styles
Shiplap is a type of woodworking that uses large, straight boards and a special adhesive to cover an existing surface. It can be used to cover any type of ceiling, including popcorn ceilings.
Shiplap is a cost-effective way to update your home’s look and feel without having to install new ceiling tiles. This versatile ceiling covering works well for updating the look of your living room or bedroom without the expense or hassle of replacing ceiling tiles.
Shiplap ceiling covering is easy to install and can be finished in just a few hours, making it ideal for quick updates to your home’s interior.
Whether you are updating your living room, kitchen, or bathroom with a fresh new look, Shiplap ceiling covering will easily transform your space into a comfortable and cozy retreat.
Conclusion
Shiplap ceiling planks are a versatile ceiling planing that can be used for a wide variety of ceiling applications. They provide an instant ceiling look and feel and can be installed easily by anyone. If you’re looking to update your home’s ceiling planks, shiplap ceiling planks are an ideal choice.
Shery
